Olympia OLP-220 燃燒器程序控制器｜IC精確時序

PRODUCT INFORMATION

Olympia OLP-220 Burner Programmable Controller (IC Precise Timing & Ignition Flame Monitoring)

front page
product
heat treatment
program controller
Olympia OLP-220 Burner Programmable Controller (IC Precise Timing & Ignition Flame Monitoring)

Product Information

heat treatment
water treatment
Injection treatment
Technology Development Department
brand
- Qin Sen
- 義大利 ATLAS
- 日本 TOHKEMY
- 義大利AQUA
- US DOW
- IDEX USA
- US CLACK
- EMERSON, USA
- American PENTAIR
- SIEMENS Germany
- American PULSAFEEDER
- Denmark DANFOSS
- Thailand HAYCARB
- France SUNTEC
- UK PUROLITE
- Japanese NOP
- Japan OLYMPIA
- Japan KATSURA
- BRAHMA, Italy
- SAGINOMIYA
- HONEYWELL
- AZBIL (YAMATAKE)
- OLTREMARE
- NIPCON
- TROCHOID
- domestic
- EGO
- KATO
- LECIP
- Taiwan ATS
- JACOBI
- ETATRON
- WAVE CYBER
- BOSCHINI
- NIPPON
- WL
- CASH ACME
- YAZAKI
- RUNXIN
About | Contact

Burner Timing Control IC | Precisely controls ignition, flame monitoring, and safety shutdown; AC220V, 日本 original component. Olympia OLP-220 Burner Programmable Controller (IC Precise Timing & Ignition Flame Monitoring)

Olympia OLP-220 Burner Programmable Controller | Precise IC Timing

燃燒器要安全運轉，需要精確的動作時序控制

油、氣燃燒器從啟動到熄火，需依序完成預吹掃、點火、火焰確認、正常燃燒與安全遮斷等動作，任一環節時序錯誤都可能造成點火失敗或安全風險。Olympia OLP-220 程序控制器作為燃燒器的動作時序中樞，以 IC 設計提供精確控制。

OLP-220 的運作機制

OLP-220 依設定的程序時序，控制燃燒器各階段動作：先進行預吹掃排除爐內殘留氣體，接著啟動點火、以火焰監測確認著火，進入正常燃燒；一旦偵測到火焰異常或熄火，立即執行安全遮斷，保護設備與人員安全。IC 設計確保各動作的時序精確、重現性高。

Frequently Asked Questions (FAQ)

「程序控制器」在燃燒器裡做什麼？ 它是燃燒器的動作時序中樞，依序控制預吹掃、點火、火焰監測、正常燃燒與安全遮斷。

火焰異常時會怎樣？ 控制器監測到火焰異常或熄火時，會立即執行安全遮斷，停止供油氣以確保安全。

OLP-220 的電源規格？ AC 220–240 V。詳細時序參數（預吹掃、安全時間）依機型請依原廠規格書確認。

適用哪些燃燒器？ 適用各式油、氣燃燒器，廣泛用於工業與商業熱能設備。

選型與技術支援

程序控制器型號應依燃燒器型式、燃料種類與安全時序需求選定。請提出產品詢問取得選型建議。

Related Products

Lighting stick (gas, diesel, heavy oil)

日本 Olympia Original

High voltage line

Taiwan ATS high quality

Olympia combustion system fuel-gas on/off valve | Large-diameter Olympia + small-diameter Lucifer, energized to open, energized to close, with programmable controller for safety shut-off.

Solenoid valve 121 series (Olympia combustion system for oil and gas line on/off)

A new choice for combustion safety: the 121 series solenoid valve offers decisive on/off switching, shutting off immediately upon power failure and rapidly cutting off fuel and gas supply in case of abnormal flame conditions.

Solenoid valve (direct acting normally closed)

日本 Olympia Original

Solenoid valve (122 series)

日本 Olympia Original

Anti-drip valve (diesel, heavy oil)

日本 Olympia Original

Coupler

日本 Olympia Original

The "Flame Eye" of the oil burner | A photosensitive sensor detects visible light in the flame, alerting the controller to shut off the circuit in case of flame abnormalities. Front/side sensing options are available.

Flame detector photocell (for oil burners - photosensitive flame detector)

A new choice for fire safety: the P930 electric sensor keeps a close eye on the flame, immediately notifying and quickly cutting off transmission the moment the flame is extinguished.

Oil regulating valve (diesel, heavy oil)

日本 Olympia Original

Contact cap

Taiwan ATS high quality

Probe (gas)

日本 Olympia Original

Safety valve (for water heater)

美國 CASH CAME Original

Nozzle holder (diesel, heavy oil)

日本 Olympia Original

Weishaupt Damper Control (1055 Series)

德國 Weishaupt Original

For natural gas heating systems where hydrogen supply is close to demand and the aim is to increase the hydrogen blending ratio.

Suntec H2R-2 Hydrogen Mixer 20~40% | Hydrogen Mixing | Natural Gas Hydrogen Mixing Carbon Reduction System

Pneumatic control (servo controller + dedicated hydrogen control valve) can be retrofitted into existing natural gas equipment.

Natural gas heating systems used for initial hydrogen energy introduction and when hydrogen supply is limited.

Suntec H2R-1 Hydrogen Mixer 1~20% Hydrogen Mixing | Natural Gas Hydrogen Mixing and Carbon Reduction System

The hydrogen mixing ratio is adjustable and unaffected by changes in natural gas flow rate, exhibiting high accuracy in hydrogen mixing ratio.

Siemens damper control (SQN75 series)

德國 Siemens Original

Siemens damper control (SQN72 series)

德國 Siemens Original

Siemens damper control (SQN70 series)

德國 Siemens Original

Siemens damper control (SQN31 series)

德國 Siemens Original

Siemens program controller (LOA type)

德國 SIEMENS Original

Siemens program controller (LMO type)

德國 SIEMENS Original

Siemens Program Controller (LME type)

德國 SIEMENS Original

Siemens Program Controller (LGB Type)

德國 SIEMENS Original

Siemens Program Controller (LFL type)

德國 SIEMENS Original

Siemens Program Controller (LAL type)

德國 SIEMENS Original

Siemens pressure switches (QPL25 series)

德國 Siemens Original

Vibration and mechanical stress applications • Metal protective tube design • Oil burner flame monitoring

Siemens QRB3 Electric Eye

Metal protective tube structure

Oil burner flame monitoring; yellow oil flame visible light detection; compatible with Siemens burner controller.

Siemens QRB1 Photosensitive Flame Detector

Full Model Code Comparison

Gas burner flame monitoring - compatible with both blue and yellow flames - unaffected by furnace red-hot heat

Siemens QRA2 Ultraviolet Flame Detector | Suitable for both gas and oil flames • QRA2/QRA2M Sensitivity Differentiation

Ultraviolet detection principle

Sagonomiya Flow Switch (FQS Series, Oil, Water)

日本 Saginomiya Original

Saginomiya Pressure Switch (SNS Series, For Steam)

日本 Saginomiya Original

Saginomiya Pressure Switch (SNS-C Series, Water, Oil, Air)

日本 Saginomiya Original

Saginomiya pressure switch (FNS series, water, oil, air)

日本 Saginomiya Original

High-pressure ignition source for diesel/light oil burners | Boosts the power supply between electrodes to generate a stable spark, igniting atomized fuel. 日本 original.

Olympia Ignition Transformer (Diesel/Light Oil Use, High Voltage Ignition Spark)

A new choice for diesel ignition, with a stable and powerful high-voltage spark, igniting instantly under heavy loads in cold weather without misfires.

Suitable for Olympia OM series oil burners and small to medium-sized combustion equipment, providing the high-voltage spark required for the ignition electrode.

Olympia Ignition Transformer (OM-220 Series)

A new choice for burner ignition: electronic booster, lightweight and easy to install, stable high-voltage spark ensures smooth ignition.

The burner features two-stage air intake regulation: the damper motor switches the air intake between low and high fire stages, achieving high-low control in conjunction with fuel quantity.

Olympia Air Damper Controller (Two-stage intake adjustment for low and high fire)

A new option for combustion control: two-stage automatic switching between low and high flame, saving fuel and ensuring stable combustion; smarter than an on/off ignition system.

Olympia Combustion System Dedicated Solenoid Valve: Opens when energized, closes when de-energized, quickly switches between fuel and air supply, and can be used with a programmable controller for safe shut-off.

Olympia OV series solenoid valves (for switching on/off combustion system oil and gas lines)

Olympia's new solenoid valve option, the OV series, offers crisp on/off control, shutting off immediately upon power failure and rapidly cutting off oil and gas supply in case of abnormal flame conditions.