heat treatment
Thermal energy materials
water treatment
water quality material
Injection treatment
injection material
After sending your product inquiry list, our relevant business unit will contact you as soon as possible
中大型熱能設備的負載常有變化,若只能全火運轉,容易耗燃料、溫度波動大。GLT 系列瓦斯燃燒機熱功率涵蓋 10~120 萬大卡(約 116~1395 kW),可二段火(High-Low)控制,依負載切換火力,兼顧火力與效率。
GLT 系列可採二段火(High-Low)控制,在低火與高火兩段間依負載切換,比單純開關火更省燃料、溫度更穩定。供氣採中壓系統,管線較小、成本較低、施工容易;適用 LPG 桶裝瓦斯與 LNG 天然氣,無需變更既有設備。
可搭配 UV 紫外線火焰監測控制器,火焰異常時自動警報並遮斷電源與瓦斯。GLT 涵蓋中大型火力並支援二段火調節,適合負載有變化、重視燃料效率的中大型場域。整機為日本 Olympia 原裝。
Olympia 瓦斯燃燒機依熱功率級距分為多個系列,依製程熱需求選用:
| 系列 | 熱功率級距 | 適合 |
|---|---|---|
| GLT(本頁) | 10~120 萬大卡 | 中大型、可二段火 |
| AG | 5~300 萬大卡 | 中型至大型工業 |
| GOM (N) | 3~40 萬大卡 | 中小型、性價比 |
| ATS TG-30GA | 30 萬大卡 | 中型場域 |
更多見 Olympia Brand Page;可搭配 燃燒控制配件 使用。
GLT 系列涵蓋多大火力? 10~120 萬大卡(約 116~1395 kW),屬中大型級距。
「二段火(High-Low)」有什麼好處? 可在低火與高火兩段間依負載切換,比單純開關火更省燃料、溫度更穩定。
GLT 和 AG、GOM 怎麼選? 依熱功率與控制需求:GOM 3~40 萬、GLT 10~120 萬(可二段火)、AG 5~300 萬(火力最大)。
LPG 和 LNG 都能用嗎? 可以,適用 LPG 桶裝瓦斯與 LNG 天然氣,無需變更既有設備。
| Burning capacity (kcal/h X 1000) | 400 |
| detect | probe |
| way to control | two-stage |
| power supply | Voltage V: 220/380 Phase: 3 |
| Motor(KW) | 0.40 |
| Gas inlet size | 25A |
| Burning capacity (kcal/h X 1000) | 500 |
| detect | probe |
| way to control | two-stage |
| power supply | Voltage V: 220/380 Phase: 3 |
| Motor(KW) | 0.75 |
| Gas inlet size | LPG: 25A LNG: 2A |
| Burning capacity (kcal/h X 1000) | 600 |
| detect | probe |
| way to control | two-stage |
| power supply | Voltage V: 220/380 Phase: 3 |
| Motor(KW) | 1 |
| Gas inlet size | LPG: 32A LNG: 40A |
| Burning capacity (kcal/h X 1000) | 800 |
| detect | UV |
| way to control | two-stage |
| power supply | Voltage V: 220/380 Phase: 3 |
| Motor(KW) | 1.50 |
| Gas inlet size | LPG: 40A LNG: 50A |
| Burning capacity (kcal/h X 1000) | 1200 |
| detect | UV |
| way to control | two-stage |
| power supply | Voltage V: 220/380 Phase: 3 |
| Motor(KW) | 2.20 |
| Gas inlet size | LPG: 40A LNG: 50A |
| fault state | reason | countermeasures |
|---|---|---|
| all do not move | 1. No power supply 2. The fuse is blown 3. Motor overload 4. Motor switch failure |
1. Check the total power 2. Check the control circuit for short circuit 3. Check whether the motor is faulty or replace it 4. Replace the switch |
| The motor will spin (but not fire) | 1. Dirty ignition stick 2. The ignition rod is in contact with the burner 3. No ignition sound and sparks 4. The air pressure switch is set too high |
1. Clean up 2. Adjustment 3. Check the ignition wire, electrode rod, ignition transformer or controller chassis feet 4. Adjustment |
| Lights up but goes out after a few seconds | 1. Dirty electric eyes 2. The sensor rod is in contact with the flame 3. Insufficient gas pressure 4. Sensing rod wear 5. The feet 13 and 14 of the controller chassis are too open |
1. Clean up 2. Adjustment 3. Adjustment 4. Replacement 5. Adjust the clamping |
| abnormal flameout | 1. There is ignition but no ignition 2. Electric eye or sensor rod failure |
1. The wind pressure is too large, adjust it down, the solenoid valve is faulty (updated), and there is no gas 2. Update the sensor or sensor stick |