Jadesun Logo
02-2331-1097

Monday to Friday 8:30am~5:30pm

join us contact us

Product Inquiry List

After sending your product inquiry list, our relevant business unit will contact you as soon as possible

Send a product enquiry list

PRODUCT INFORMATION

Suntec TV Series Heavy Oil Pressure Regulator Valve | Matching T Series Oil Pump Pressure Regulator

Product Information

Used with T-series oil pumps, the oil supply pressure is adjusted externally by connecting to the nozzle pipeline, suitable for industrial heavy oil and light oil heating systems. Suntec TV Series Heavy Oil Pressure Regulator Valve | Matching T Series Oil Pump Pressure Regulator

Available in two pressure ranges: 2–10 bar and 7–40 bar, allowing for installation in any orientation.

T 泵本身不含調壓,重油高容量系統需要外接穩壓

Suntec T 系列高容量重油泵本身不具壓力調節功能,噴嘴管路壓力須由外部裝置設定與穩定;若缺乏可靠的外接調壓,重油系統在負載變動時難以維持穩定的噴嘴壓力。TV 閥即為配套 T 泵而設計的外接壓力調節閥。

 

TV 重油穩壓閥的設計特色

提供 2–10 bar 與 7–40 bar 兩種壓力範圍(出廠設定分別為 7、20 bar),對應流量最高 5000 L/Hr,耐油溫 150°C、運作黏度 3–75 cSt。進出與回油口皆為 G 3/4,重量 3 kg。相容重油、輕油與 B100。

 

螺絲調壓的運作機制

噴嘴管路壓力以 TV 閥的調整螺絲設定:順時針增壓、逆時針減壓;超出噴嘴需求的多餘油經閥回流。雙管系統多餘油回油箱,單管系統回泵吸入口。閥可任意安裝方位,噴嘴口與進油口可互換。

 

Application scenarios and system pairings

TV 適用工業重油與輕油加熱系統,安裝於 T 泵的噴嘴管路上。更多選型見 重油燃燒機分類 and Suntec 品牌頁.

提供 2–10 bar 與 7–40 bar 兩種壓力範圍,可任意安裝方位技術講解

project content
Type 外接式壓力調節閥(非泵浦),螺絲調壓
適用燃料 重油、輕油、B100
配套 可搭配 Suntec T 泵使用
對應流量 最高 5000 L/Hr
壓力範圍 10 型:2–10 bar;40 型:7–40 bar
出廠設定壓力 7 bar(10 型)/20 bar(40 型)
調壓方式 調整螺絲(順時針增壓、逆時針減壓)
運作黏度 3–75 cSt(更高黏度須加熱降至 75 cSt 以下;煤油應用請洽原廠)
油溫(閥內) 0–150°C
安裝方位 任意方位皆可
進油口 G 3/4
噴嘴出口 G 3/4
回油口 G 3/4
連接牙 平行牙(ISO 228/1)
weight 3 kg
流量/黏度(泵浦專屬欄位) 不適用(本品為調壓閥,非泵浦)

Related Products