PRODUCT INFORMATION
Danfoss 052F Series Ignition Transformer (EBI) | Ignition Unit for Oil Gas Burners
- front page
- product
- heat treatment
- Combustion Control Device
- Danfoss 052F Series Ignition Transformer (EBI) | Ignition Unit for Oil Gas Burners
Product Information
- heat treatment
-
water treatment
- Deaerator
- Desulfurizer
- Arsenic remover
- Water softener (calcium and magnesium ion removal)
- Carbon filter (removes odor and residual chlorine)
- Sand filter (removal of suspended impurities)
- Iron remover (removal of iron and manganese ions)
- RO water purifier
- Pre-backwash filter
- UV ultraviolet sterilizer
- Ion exchange resin
- reverse osmosis membrane tube
- quick filter
- Various tanks for water treatment
- Various application filter media
- 美國 Clack Clark control valve
- 美國 Fleck Control Valve
- 美國 Pentair Control Valve
- 美國 Autotrol Control Valve
- Runxin Control Valve
- Injection treatment
- Technology Development Department
-
brand
- Qin Sen
- 義大利 ATLAS
- 日本 TOHKEMY
- 義大利AQUA
- US DOW
- IDEX USA
- US CLACK
- EMERSON, USA
- American PENTAIR
- SIEMENS Germany
- American PULSAFEEDER
- Denmark DANFOSS
- Thailand HAYCARB
- France SUNTEC
- UK PUROLITE
- Japanese NOP
- Japan OLYMPIA
- Japan KATSURA
- BRAHMA, Italy
- SAGINOMIYA
- HONEYWELL
- AZBIL (YAMATAKE)
- OLTREMARE
- NIPCON
- TROCHOID
- domestic
- EGO
- KATO
- LECIP
- Taiwan ATS
- JACOBI
- ETATRON
- WAVE CYBER
- BOSCHINI
- NIPPON
- WL
- CASH ACME
- YAZAKI
- RUNXIN
- About | Contact
Suitable for intermittent ignition of small and medium-sized oil and gas burners, applicable to dual-electrode or single-electrode ignition configurations for the casing. Danfoss 052F Series Ignition Transformer (EBI) | Ignition Unit for Oil Gas Burners
EBI high-frequency electronic ignition, small size and light weight, compliant with EN 60730-2-5, RoHS/EMC, replacing several older 052F part numbers.
燃燒器點火需可靠的高壓火花,尤其在低溫冷啟動
油與瓦斯燃燒器的點火可靠度直接影響啟動成功率與積碳;低溫冷啟動時更需要足夠的點火能量。Danfoss 052F 系列 EBI 點火單元以高頻電子式產生穩定高壓火花,對應此需求。
電子點火的運作機制
點火單元將一次側 230 V 低壓轉換為二次側高壓(約 15 kV,EBI4 M 版為 2×7.5 kV 峰值),在雙電極之間或單電極對機殼之間產生火花點燃燃料。高頻運作使體積與重量都小,適合現代緊湊型燃燒器。
052F/EBI 的設計特色
一次與二次側採插接式端子,便於安裝與維護;符合 EN 60730-2-5,並符合 RoHS、WEEE 與 EMC(EN 55014-1/-2)。抗熱過載能力佳,穩定點火有助降低積碳、節省油耗。052F 為料號系列,涵蓋多款單元並可替換多款舊型 Danfoss 點火器。
Application scenarios and system pairings
052F/EBI 適用中小型油與瓦斯燃燒器點火,可搭配對應之點火電極與高壓線使用。
EBI 高頻電子點火、體積小重量輕,符合 EN 60730-2-5、RoHS/EMC,替換多款舊型 052F 料號產品規格
| project | content |
|---|---|
| Type | EBI 電子點火單元(052F 料號系列),間歇式點火 |
| Be applicable | 中小型油/瓦斯燃燒器;雙電極或單電極對機殼點火 |
| Primary side voltage | 230 V,50/60 Hz(EBI4 M 供電範圍約 187–255 V) |
| 一次側功率 | 約 60 VA |
| 一次側電流 | 約 0.25 A |
| Secondary side voltage | 約 15 kV(EBI4 M 版:2 × 7.5 kV 峰值) |
| 二次電流 | 約 40 mA |
| 點火方式 | 間歇式 |
| 端子 | 一次/二次側插接式 |
| 標準/認證 | EN 60730-2-5;RoHS、WEEE;EMC 符合 EN 55014-1/-2 |
| weight | 約 290–300 g |
| 替換範圍 | 可替換多款舊型 052F 料號(如 052F0030/0033/0034 等,實際對照〔待確認〕) |
| 特定型號數值 | 〔待原廠規格書確認〕(052F 涵蓋多料號,數值依型號而異) |