PRODUCT INFORMATION
V Series membrane tube
- front page
- product
- UF ultrafiltration membrane
- Technology Development Department
- V Series membrane tube
Product Information
- heat treatment
-
water treatment
- Arsenic remover
- Desulfurizer
- Deaerator
- Water softener (except calcium and magnesium)
- Carbon filter (removal of chloramines)
- Sand filter (remove impurities)
- Iron remover (removal of iron and manganese)
- RO water purifier
- Pre-backwash filter
- UV ultraviolet sterilizer
- Ion exchange resin
- reverse osmosis membrane tube
- quick filter
- Various tanks for water treatment
- Various application filter media
- 美國 Clack Clark control valve
- 美國 Fleck Control Valve
- 美國 Pentair Control Valve
- 美國 Autotrol Control Valve
- Runxin Control Valve
- Injection treatment
- Technology Development Department
-
brand
- Demo brand
- US DOW
- IDEX USA
- US CLACK
- EMERSON, USA
- American PENTAIR
- SIEMENS Germany
- American PULSAFEEDER
- Denmark DANFOSS
- Thailand HAYCARB
- France SUNTEC
- UK PUROLITE
- Japanese NOP
- Japan OLYMPIA
- Japan KATSURA
- BRAHMA, Italy
- SAGINOMIYA
- HONEYWELL
- AZBIL (YAMATAKE)
- OLTREMARE
- NIPCON
- TROCHOID
- domestic
- EGO
- KATO
- LECIP
- ATS
- JACOBI
- ETATRON
- WAVE CYBER
- BOSCHINI
- NIPPON
- WL
- CASH ACME
- YAZAKI
- RUNXIN
- About | Contact
Oltremare® OLTRECAP V Series membrane tube
OLTRECAP - V Series
- – Between microfiltration (MF) and nanofiltration (NF).
- – Can be used for separation and purification of enzymes, viruses or proteins, hemodialysis
(hemodialysis), fruit juices, biological preparations, pharmaceutical concentrates. - – Can be used for wastewater recycling, such as: electroplating wastewater, dyeing and finishing wastewater, semiconductor wastewater.
- – The operating mode is dead-end or crossflow
Technical teaching:
OLTRECAP - V Series Series Product Specifications
structure | Capillary |
Membrane tube material | Polyvinylidene fluoride film (PVDF) |
molecular weight cut off | 0.075 μm |
Effective membrane area | 376.6ft² (35m²) |
Maximum water inlet pressure | 0.5MPa (73psi) |
Maximum transmembrane pressure difference | 0.2MPa (30psi) |
Maximum backwash pressure | 0.2MPa (30psi) |
operating temperature | 5-40°C (41-104°F) |
pH range | 1-12 |
operating mode | Dead-end or cross flow, interval or continous air scrubbing |
certified |
structure | Capillary |
Membrane tube material | Polyvinylidene fluoride film (PVDF) |
molecular weight cut off | 0.075 μm |
Effective membrane area | 807.0ft² (75m²) |
Maximum water inlet pressure | 0.5MPa (73psi) |
Maximum transmembrane pressure difference | 0.2MPa (30psi) |
Maximum backwash pressure | 0.2MPa (30psi) |
operating temperature | 5-40°C (41-104°F) |
pH range | 1-12 |
operating mode | Dead-end or cross flow, interval or continous air scrubbing |
certified |
structure | Capillary |
Membrane tube material | Polyvinylidene fluoride film (PVDF) |
molecular weight cut off | 0.075 μm |
Effective membrane area | 1130.2ft² (105m²) |
Maximum water inlet pressure | 0.5MPa (73psi) |
Maximum transmembrane pressure difference | 0.2MPa (30psi) |
Maximum backwash pressure | 0.2MPa (30psi) |
operating temperature | 5-40°C (41-104°F) |
pH range | 1-12 |
operating mode | Dead-end or cross flow, interval or continous air scrubbing |
certified |