PRODUCT INFORMATION
ULP ultra-low pressure pure water membrane (high water volume and low desalination type, 4040, 8040)
- front page
- product
- Low pressure membrane
- Technology Development Department
- ULP ultra-low pressure pure water membrane (high water volume and low desalination type, 4040, 8040)
Product Information
- heat treatment
-
water treatment
- Arsenic remover
- Desulfurizer
- Water softener (except calcium and magnesium)
- Carbon filter (removal of chloramines)
- Sand filter (remove impurities)
- Iron remover (removal of iron and manganese)
- RO water purifier
- Pre-backwash filter
- UV ultraviolet sterilizer
- Ion exchange resin
- Reverse osmosis pure water membrane
- Stainless steel filter barrel
- Various clean water buckets
- Various application filter media
- CLACK control valve head
- FLECK control valve head
- Pentair control valve head
- Atu group control valve head
- Runxin control valve head
- Injection treatment
- Technology Development Department
-
brand
- Demo brand
- US DOW
- IDEX USA
- US CLACK
- EMERSON, USA
- American PENTAIR
- SIEMENS Germany
- American PULSAFEEDER
- Denmark DANFOSS
- Thailand HAYCARB
- France SUNTEC
- UK PUROLITE
- Japanese NOP
- Japan OLYMPIA
- Japan KATSURA
- BRAHMA, Italy
- SAGINOMIYA
- HONEYWELL
- AZBIL (YAMATAKE)
- OLTREMARE
- NIPCON
- TROCHOID
- domestic
- EGO
- KATO
- LECIP
- ATS
- JACOBI
- ETATRON
- WAVE CYBER
- BOSCHINI
- NIPPON
- WL
- CASH ACME
- YAZAKI
- RUNXIN
- About | Contact

ULP ultra-low pressure pure water membrane (high water volume and low desalination type, 4040, 8040)
ULP series products are ultra-low pressure aromatic polyamide composite reverse osmosis membrane elements developed for surface water and groundwater desalination. Its operating pressure is about 2/3 of that of conventional low-pressure brackish water membranes, and the desalination rate can reach 99.5%. It has a high desalination rate and meets the water production requirements under the low-pressure conditions of the system. It is mainly used in the desalination treatment of surface water, groundwater and municipal water with a salt content of less than 2000mg/L. Its application fields include packaged drinking water, quality water supply in residential areas or parks, food and beverages, etc. It has the characteristics of high water production, low operating pressure and good desalination performance.
Manufacturer, excellent strength:
Introduced 美國 membrane production process and automated production line, with an annual production capacity of 3 million square meters of reverse osmosis membranes and nanofiltration membranes, the team has a strong and unique R&D innovation strength, and strong technical support can provide customers with industry customized solutions Solutions to meet the deep and multi-faceted needs of customers.
Quality Assurance, Superior Performance:
The entire production process of reverse osmosis membrane and nanofiltration membrane products is strictly implemented in accordance with ISO standards, and all products have been strictly tested by advanced testing equipment to ensure product performance and delivery quality.
International qualifications, identify products:
It has more than 30 international invention patents, and has fully passed the ISO9001 quality system and the national health and safety product certification of the national authoritative organization, and the 美國 National Health Foundation NSF certification.
Product Features:
– Only two-thirds of the operating pressure of conventional reverse osmosis membranes is required to achieve the effect
– Effectively reduce the risk of damage to pumps, piping and membrane casings due to excessive pressure
– Significantly save maintenance costs and maintain high quality and efficiency
– Under low pressure operation, low pressure energy saving membrane still has high salt rejection
– 可用於水廠,發電廠等
ULP series products are ultra-low pressure aromatic polyamide composite reverse osmosis membrane elements developed for surface water and groundwater desalination. Its operating pressure is about 2/3 of that of conventional low-pressure brackish water membranes, and the desalination rate can reach 99.5%. It has a high desalination rate and meets the water production requirements under the low-pressure conditions of the system. It is mainly used in the desalination treatment of surface water, groundwater and municipal water with a salt content of less than 2000mg/L. Its application fields include packaged drinking water, quality water supply in residential areas or parks, food and beverages, etc. It has the characteristics of high water production, low operating pressure and good desalination performance. Product Specifications
structure | spiral wound |
Membrane tube material | Composite Polyamide |
Effective membrane area | 6ft² (0.6m²) |
Water production | 200 gpd (0.76 m³/d) |
Salt removal rate | 97.0 – 98.5 % |
greatest pressure | Fiberglassed - 600 psi (41.4 bar), Tape Wrapped - 300 psi (20.7 bar) |
pH range | 3.0-10.0 |
certified | ![]() |
structure | spiral wound |
Membrane tube material | Composite Polyamide |
Effective membrane area | 12ft² (1.1m²) |
Water production | 420 gpd (1.6 m³/d) |
Salt removal rate | 97.0 – 98.5 % |
greatest pressure | Fiberglassed - 600 psi (41.4 bar), Tape Wrapped - 300 psi (20.7 bar) |
pH range | 3.0-10.0 |
certified | ![]() |
structure | spiral wound |
Membrane tube material | Composite Polyamide |
Effective membrane area | 28ft² (2.6m²) |
Water production | 900 gpd (3.4 m³/d) |
Salt removal rate | 97.0 – 98.5 % |
greatest pressure | Fiberglassed - 600 psi (41.4 bar), Tape Wrapped - 300 psi (20.7 bar) |
pH range | 3.0-10.0 |
certified | ![]() |
structure | spiral wound |
Membrane tube material | Composite Polyamide |
Effective membrane area | 25ft² (2.3m²) |
Water production | 850 gpd (3.22m³/d) |
Salt removal rate | 97.5 – 98.5 % |
greatest pressure | Tape Wrapped - 300 psi (20.7 bar) |
pH range | 3.0-10.0 |
certified | ![]() |
structure | spiral wound |
Membrane tube material | Composite Polyamide |
Effective membrane area | 19ft² (1.8m²) |
Water production | 620 gpd (3.4 m³/d) |
Salt removal rate | 97.5 – 98.5 % |
greatest pressure | Fiberglassed - 600 psi (41.4 bar), Tape Wrapped - 300 psi (20.7 bar) |
pH range | 3.0-10.0 |
certified | ![]() |
structure | spiral wound |
Membrane tube material | Composite Polyamide |
Effective membrane area | 45ft² (4.2m²) |
Water production | 1600 gpd (6.06m³/d) |
Salt removal rate | 97.5 – 98.5 % |
greatest pressure | Fiberglassed - 600 psi (41.4 bar), Tape Wrapped - 300 psi (20.7 bar) |
pH range | 3.0-10.0 |
certified | ![]() |
structure | spiral wound |
Membrane tube material | Composite Polyamide |
Effective membrane area | 35ft² (3.2m²) |
Water production | 1200 gpd (4.54m³/d) |
Salt removal rate | 97.0 – 98.5 % |
greatest pressure | Fiberglassed - 600 psi (41.4 bar), Tape Wrapped - 300 psi (20.7 bar) |
pH range | 3.0-10.0 |
certified | ![]() |
structure | spiral wound |
Membrane tube material | Composite Polyamide |
Effective membrane area | 105ft² (9.8m²) |
Water production | 3700 gpd (14m³/d) |
Salt removal rate | 98.0 – 98.8 % |
greatest pressure | Tape Wrapped - 300 psi (20.7 bar) |
pH range | 3.0-10.0 |
certified | ![]() |
structure | spiral wound |
Membrane tube material | Composite Polyamide |
Effective membrane area | 85ft² (7.9m²) |
Water production | 3000 gpd (11.4m³/d) |
Salt removal rate | 98.0 – 98.8 % |
greatest pressure | Fiberglassed - 600 psi (41.4 bar), Tape Wrapped - 300 psi (20.7 bar) |
pH range | 3.0-10.0 |
certified | ![]() |